• Make Your Central Air More Efficient

    Are you concerned that your central air conditioning system isn’t working as well as it could be? If your utility bills are high or if you need to run your AC for long hours to keep your Seattle home at a comfortable temperature, there are some steps you can take to make your system more efficient. You might begin by buying a programmable thermostat, which keeps your bills lower by ensuring that you aren’t cooling your home when you’re asleep or when nobody is home. You should also change out your air filters regularly—at least once a month during periods of heavy AC use. Don’t forget to have your system serviced from time to time by an HVAC professional. For more tips, check out this video.

  • Is Your AC Unit Leaking Refrigerant?

    Your air conditioning unit needs just the right amount of refrigerant to continue to function properly—neither too much nor too little, in other words. If your AC unit is low on refrigerant, the most likely cause is a leak. If you have reason to think that there could be a leak in your AC unit, you should call an air conditioner contractor in the Seattle area so that your leak can be tracked down and repaired. These are some of the most likely signs that your AC unit may have sprung a leak. AC - unit

    Your utility bills are unusually high. When there’s a refrigerant leak in your system, your AC unit has to run for more hours to keep your household at a comfortable temperature. You’ll see the expensive results of this when your electric bill arrives. If you want to ensure that the cost of cooling your home doesn’t get out of hand, always be quick to respond to any suspected AC leaks.

    Your home isn’t staying cool. If you keep running your air conditioning and your house is still uncomfortably warm, a leak could be the culprit. When your AC is low on refrigerant, it’s much more difficult for it to effectively cool the air inside your home. If the air coming out of your registers is warm—or if there isn’t much air coming out at all—that’s another strong sign that your AC doesn’t have enough refrigerant.

    There’s ice on your refrigerant lines. If there’s a refrigerant leak, the copper wire line on your outdoor AC unit can become covered with ice—even if it’s hot outside. When your AC has low refrigerant, it causes the remaining refrigerant to become too cold and cause freezing in your evaporator coil. To avoid expensive damage to your compressor, turn off your AC unit right away and call an HVAC professional.

  • Three Reasons to Invest in AC Maintenance

    When the days begin to grow warmer, most Seattle residents begin using their air conditioning more frequently. If you want to keep your air conditioning system operating at top capacity, it’s important to invest in routine maintenance. Here are some of the most critical reasons to have your air conditioner serviced by an HVAC professional on a regular basis. AC - Unit

    You’ll need fewer repairs. The longer your system goes without a professional inspection, the more time it has to malfunction. All too often, these minor issues go neglected—and turn into major issues. When a qualified HVAC technician looks at your air conditioning system, he or she will be able to look for signs of trouble and prevent them from turning into expensive repairs for you. Routine maintenance is an investment that can pay off in the form of fewer calls for emergency AC repair.

    Your system will be more efficient. When your air conditioning system goes without a professional checkup for too long, it will inevitably begin to operate less efficiently. This will translate into subpar performance, which means that you’ll need to run your air conditioner more often to keep your house cool. Eventually, your AC system may not provide you with good service at all. You can dodge this problem by having your system professionally serviced from time to time.

    You’ll enjoy better performance. The best reason to have your air conditioning system routinely serviced is that it will result in a more comfortable home for you and your family. If any element of your air conditioner is failing, it is bound to affect the performance of the entire system. If this happens during the warmer months, you could be left without a fully functional air conditioner—which is something that no homeowner wants to contemplate. Fortunately, you can reduce your chances of a malfunction by investing in routine professional HVAC service.

  • Be Proactive with Air Conditioner Maintenance

    The better you take care of your air conditioner serving Seattle , the longer it will last and the more efficient it will be for your home. Chances are you won’t notice any problems with your air conditioner during the winter, so you should check it out before the heat sets in so you have time to make any necessary repairs. You can also talk to your HVAC team for professional service and maintenance, but you should still take care of certain aspects on your own. Continue on and be proactive with your air conditioner maintenance. ac - maintenance

    Check it out early.

    You probably only use your air conditioner for half of the year or less, but it might not be perfectly safe in storage. It’s a good idea to check your unit out before the warm weather fully comes rolling through; in the event that you do find some sort of problem, you will have time to address it before you need it. The last thing you want is to set your air conditioner up on a hot day only to find that it has a serious malfunction and must be repaired or replaced if you want relief from the heat. If you were having trouble with your air conditioner before you packed it up for the season, it is especially important that you take a look earlier rather than later.

    Schedule maintenance services.

    You’re not alone when it comes to air conditioner maintenance. Professional air conditioner contractors are happy to help you keep your air conditioner in top shape for as long as possible. Talk to your HVAC specialist about an air conditioner maintenance schedule and make sure you stick to it so you can enjoy a cool, comfortable, and affordable summer.

    Change your filters.

    Working with the pros is a great idea, but there are ways you can take care of your air conditioner on your own as well. Make sure you change the air filters whenever they get dirty; this can increase the efficiency of your unit as well as improve your indoor air quality.

  • How to Get Your Home’s Temperature Right

    A quality air conditioner serving Seattle may be just what you need to get through the summer comfortably, but it could be difficult to keep the temperature consistent between your upper and lower floors. It is possible to achieve the right temperature throughout the house, but you might need the help of an HVAC professional . Watch this video clip on how to get your home’s air conditioner temperature right.

    Many people struggle to keep the temperature even throughout their houses, and this is often due to the location of the thermostat. If your thermostat is on the ground floor, it will base its information off of nearby readings. You can keep your heating and cooling systems running by switching the fan to the “on” position. You could also talk to your air conditioner and HVAC professional about a zone system, which consists of adding a second thermostat to your upper level for better temperature control.

  • The Benefits of a New Air Conditioner

    The function and efficiency of your home’s HVAC unit can significantly affect your family’s comfort, as well as the cost of your monthly energy bill. If you’re not completely satisfied with your AC’s performance, then you may benefit from investing in a new air conditioner serving Seattle.

    New air conditioners can increase the comfort that you enjoy while indoors by cooling properly and contributing to ideal humidity levels. Also, the technology used in newer units can improve your home’s energy efficiency, even if your current AC hasn’t reached the end of its 10 to 15-year lifespan.

    Some homeowners hesitate to invest in a new air conditioner when they aren’t sure how long they will be staying in their home. If you move, it’s true that you won’t be around to enjoy your long-term return on investment, but you will benefit from the increased value that it provides for your property. Additionally, you will be able to take advantage of better AC performance for the time that you remain in your home.

    AC Units

  • When to Replace Your Furnace

    Have your energy bills increased and you can’t figure out why? If so, then it may be time to look for a replacement furnace in Seattle. Just like heat pumps and air conditioners, furnaces lose their efficiency as they near the end of their lifespan. Watch this video to learn more about furnace service and when to replace your furnace .

    Another sign that you may need a new unit is if you’re frequently scheduling furnace repair appointments. A furnace repair that breaks down regularly despite expert maintenance services could be on its last legs. Also, if you’re often adjusting your thermostat or if your home never gets as warm as you would like, then it’s probably time to start looking for a new furnace.

  • Taking Good Care of Your Air Conditioner

    For many people, having a well-functioning AC unit is essential for staying comfortable during the summer months. If you want to get a long life and the maximum efficiency from the air conditioning unit in your Seattle home, regular upkeep is a must. Here, you’ll find several tips to help you keep your air conditioner in good shape:

    Pay attention to the filter.

    Dirty vs Clean AC Filter Your AC’s filter plays an important role in improving your indoor air quality and helping the unit run efficiently. The air filter is housed at the air intake and is responsible for trapping particles from the air as they’re drawn into the air conditioner. By trapping these airborne particles, the filter ensures that there will be less of them floating around your home and settling on your furniture. Air filters can be either reusable, which require cleaning, or disposable, which should regularly be replaced. You should clean or replace your filter at least once per month for optimum efficiency and to help keep your indoor air clean.

    Clean the area around your air conditioner.

    Minimizing the amount of debris around your air conditioner can help it run better and require less frequent cleanings. Regularly remove fallen leaves and similar items that accumulate near the condenser unit, and trim back any foliage that may be hindering air flow.

    Schedule regular maintenance.

    When it comes to repairs and more in-depth maintenance, it’s a good idea to hire a professional. When you schedule a tune-up appointment with an HVAC technician, he will perform several steps to help keep your air conditioner working well. He should ensure that the unit has sufficient refrigerant and test for leaks, measure how much air is flowing through the evaporator coil, and check the duct system for holes. You can also expect him to make sure that the thermostat is functioning properly, inspect electrical terminals, and tighten and clean connections. You should schedule professional air conditioner maintenance at least once per year to take good care of your unit.

  • How Do Heat Pumps Work?

    For many people, the first thing that comes to mind when they need to lower the temperature in their home is to turn on the AC. Many households use air conditioners to stay cool during the summer, but heat pumps near Seattle can provide the same effect while using less energy.

    Heat pumps are energy-efficient heating and cooling units.

    Heat Pumps Because of their name, the average person wouldn’t expect a heat pump to have anything to do with cooling. These units can have the dual purpose of heating your home in the winter, and keeping it cool during the summer. Heat pumps are units that use a small amount of energy to move heat to a different location. These devices are ideal for use in climates that enjoy moderate temperatures without hot or cold extremes. When installed in less temperate zones, supplemental heating or air conditioning may be necessary.

    Heat pumps rely on heat transfer to warm or cool your home.

    A heat pump’s purpose is to pull heat from the air or the ground, and then move it to another location. These units use mechanical-compression style refrigeration and typically consist of two components. The indoor part, which is called the air handler, contains the blower, which moves air into your home. The outside section, which is the heat pump, resembles an air conditioning unit and is responsible for heat transfer. Heat pumps come in a variety of styles, but their basic principle for operation is heat transfer. In the case of cooling your home, the machine works by pulling warmth from inside the home and moving it outside.

    Heat pumps may offer you several advantages.

    Heat pumps are single unit devices that are used for both heating and cooling, often making them more convenient to install than an HVAC system. Also, because they run on electricity and do not require fuel to heat or cool a space, they are energy-efficient and can save you significantly energy costs.

  • What is a Mini-Split Air Conditioner?

    Are you considering your different options for air conditioning near Seattle? Mini-split systems offer heating and cooling solutions for areas that lack central air conditioners or heating systems.


    Mini-split air conditioners are ductless units that are used to cool a room or area of a building. These units are similar to central systems in that they have both an indoor and outdoor component. Mini-splits consist of an outdoor condenser/compressor and an indoor air-handling unit.


    Mini-Split Air Conditioner While there are numerous potential applications for these air conditioners, most often they are installed as retrofit add-ons for buildings that lack a ducted heating system. Examples can include homes that are heated using radiant panels, space heaters, or hot water heat. Mini-split air conditioners are also an excellent cooling solution for small apartments and room additions where it may not be feasible to install ductwork.


    Due to their small size and the flexibility of their installation, mini-split air conditioners can be used to cool a single area or room. Additionally, many models can have up to 4 indoor handling units connected to a single outdoor condenser/compressor. Because each indoor unit has an individual thermostat, you can save money by cooling only the areas that you wish. Mini-splits also tend to be easier to install than other cooling systems. Most styles require only a 3-inch-wide hole through the wall to connect the indoor and outdoor components, and your indoor air-handling units can be as far as 50 feet from the outdoor apparatus. This allows home and business owners to install the outside section in an inconspicuous place, if necessary.


    The primary drawback that you will face if you opt for a mini-split air conditioner is the cost. These systems will require more investment per ton of cooling capacity when compared to central units, assuming there is already ductwork present, and can cost significantly more than a window cooling unit. Additionally, mini-splits can be more conspicuous than central air vents, but they are generally less obtrusive than window air conditioners.